Intelligent Precision Power Distribution Unit Use 1.3-inch OLED
screen
with clear display
PDU Power Distribution Unit Advantages:
► Use imported 32-bit ARM microprocessor (CPU) control and software
programming
technology for advanced embedded operating system;
► Use 85 ~ 265Vac global applicable working power technology,
achieved level 5 energy
efficiency management
► Use 1.3-inch OLED screen with clear display
► isolated RS485 communication port. It adopts standard MODBUS-RTU
► Built-in alarm buzzer
► Built-in clock system and backup power supply
► meeting the requirements of IEC60297 standards；
Overview
E-link's IMPU series Metered Switched PDU with automatic transfer
switching is the perfect
solution for critical network installations that require remote
power control and power supply
redundancy on 85-265 AC equipment. E-link 's IMPU series metered PDUs help you keep track
of conditions at your data center, and can automatically notify you
before things get out of hand.
The PDU also allows you to automatically reboot outlets when
attached devices cease to
respond, disable outlets to reduce current consumption
or switch on cooling devices to lower rack temperatures.
A comprehensive selection of monitoring features is also included;
event alarms , outlet-specific
metering, SNMP polling and other alarm functions help you to keep
tabs on vital network
elements, avoid costly service calls and maximize up time.
Application
Technical Indexs
| Item | Parameter Requirements | Remark |
| Working Power | 85V~265VAC | |
| Working Frequency | 50Hz | |
| Total Input | Specification please see the product label | According to Order Requirement |
| Master Switch | Please see the product label | According to Order Requirement |
| Voltage Measurement | Range:0~300V | Isolated |
| Display Digits:0.01V |
| Current Measurement | Input: Transformer | Isolated |
| Range:0~30mA | Transformer output secondary current |
| Display Digits:0.01A | Primary Current |
| Branch off | 16A/250Vac Max. | |
| Power on Sequence | Supports power-on sequence output from 1 to 8 branches | |
| Power Measurement | Accuracy:Grade 1 | Active measurement |
| Display Digits: 0.01kW |
| Electricity Measurement | Accuracy:Grade 1 | Active measurement |
| Display Digits:0.001kWh |
| Temperature and Humidity Measurement | Temperature:0.01℃ Humidity:0.01%RH | Optional: But with sensors |
| Communication Port | RS485 port, Modbus RTU Communication Protocol | Optional: uplink / downlink |
| Display | OLED Screen, Blue text on black / White text on black | Optional |
| Alarm Function 1 | Under-voltage, over-voltage, over-current, power out-of-limit
alarms | Optional |
| Alarm Function 2 | Temperature and humidity alarm | Optional: But with sensors |
| Alarm Function 3 | Access control 1, access control 2, smoke detection and flood
alarms. | Optional: But with sensors |
| Alarm Function 4 | Lightning protection failure detection and lightning protection
count | Optional, but with a lightning protection module |
| Photosensitive Detection | Normally used for automatic lighting with extended functions | Optional, but with an interface expansion module |
Orrdering Information
| Model Number | Installation | Length | Profile specification | Input Connction | Input control | Output control |
| LNK- IMPU_8GB10_ZK_GB | Horizontal | 19Inch | 1U | Power Cable 1.8m | Micro Circuit Breaker 1P,16A | GB2015,Max=13A,8CH Control output |
| LNK- IPMU_8IEC13K_ZK_IEC14 |
Horizontal | 19Inch | 1U | Power Cable 1.8m | Micro Circuit Breaker 1P,16A | IEC320-C13(Cable anti falling),Max=13A,8CH Control output |
| LNK-IPMU_8UL_ ZK_UL |
Horizontal | 19Inch | 1U | Power Cable 1.8m | Micro Circuit Breaker 1P,16A | NEMA5-15R Max=16A,8CH Control output |
