PoE Switch Product Description:
E-link's LNK-IMC205GHP-SFP Series is a Mini Industrial High Power
90W 802.3bt PoE Switch that offers users a versatile connection
option. Featuring 4 *10/100/1000T Ethernet ports, which support
IEEE802.3at/af/bt for a maximum of 90W/port, as well as
1*10/100/1000T Gigabit Ethernet port and 2*100/1000 dual rate SFP
slots for fiber connection.
The versatile LNK-IMC205GHP-SFP adopts the IEEE 802.bt PoE++
standard and PoH technology, granting it the capability to source
up to 95 watts of power by using all the four pairs of standard
Cat5e/6 Ethernet cabling to deliver power and full-speed data to
each remote PoE compliant powered device (PD). By tripling the
power capabilities of conventional 802.3at PoE+, it is an ideal
solution to satisfy the growing demand for higher power consuming
network PDs, such as: PoE PTZ speed dome cameras, Thin clients, AIO
(all-in-one) touch PCs, point of sale (POS) and information kiosks,
Remote digital signage displays and PoE lightings.
Being IP40 rated and DIN-rail mountable, the LNK-IMC205GHP-SFP
adopts high EFT and ESD protection for industrial networking
applications, making it suitable for scenarios such as
power/utility, water wastewater, oil/gas/mining, factory
automation, security surveillance, ITS and any other outdoor or
harsh environment.
Gigabit PoE Switch Features:
5 10/100/1000BASE-T Gigabit Ethernet RJ45 copper ports
This device provides five 10/100/1000Base-T Gigabit Ethernet RJ45
copper ports. Each port can operate independently without affecting
other ports and boasts a high transmission speed.
2 SFP slots, supporting 1000BASE-X and 100BASE-FX transceiver in
dual modes
Equipped with two SFP slots, this device supports 1000Base-X and
100Base-FX transceiver in dual modes, providing a powerful
connection.
Complies with IEEE 802.3bt PoE Standard
This device complies with the IEEE 802.3bt PoE Standard, ensuring
that it can provide a stable power supply for all of the connected
PoE devices.
Up to 4 ports of IEEE 802.3bt/at/af devices powered
This device can support up to four ports of IEEE 802.3bt, at and af
devices and can provide them with the power they need to operate
properly.
Up to 360-watt PoE budget
The device provides a power budget up to 360 watts for any of the
PoE devices connected to it, avoiding any unnecessary power loss
and making it even more efficient.
Supports PoE power up to 95 watts for each PoE port
Each of the PoE ports can support an output power of up to 95
watts, allowing the device to support high-power PoE devices
without any issue.
Supports DIN-Rail installation
This device supports installation through a DIN-Rail system, making
it flexible in terms of where it can be placed and the types of
installations it can be used in.
Compact fanless design avoids overheating
The compact fanless design allows the device to avoid overheating,
allowing it to run at full capacity while still maintaining an
adequate level of cooling.
IP40 rugged high strength metal case
The device also comes with an IP40 rugged high strength metal case,
making it durable enough to withstand any tough environment.
48~57V DC redundant power with reverse polarity protection
The device is powered by 48~57V DC redundant power with reverse
polarity protection, ensuring that the power supply is always
protected and any issues can be quickly resolved.
90W PoE Switch Technical Parameters:
| Standards: | IEEE 802.3 Ethernet |
| IEEE 802.3u Fast Ethernet |
| IEEE 802.3ab Gigabit Ethernet |
| IEEE 802.3x Full-Duplex Flow Control |
| IEEE 802.3az Energy Efficient Ethernet (EEE) |
| IEEE 802.3bt 4-pair Power over Ethernet |
| IEEE 802.3at Power over Ethernet Plus PSE |
| IEEE 802.3af Power over Ethernet Plus |
| Forward & Filtering Rate: | 14,880pps (10Mbps) |
| 148,800pps (100Mbps) |
| 1,488,000pps (1000Mbps) |
| Packet Buffer: | 2Mbits |
| Packet Length: | 10Kbytes |
| MAC Address Table: | 4K |
| Switch Fabric: | 14Gbps/non-blocking |
| Exchange Property | Backplane bandwidth: 14Gbps; Packet forwarding rate: 14.88Mpps |
| Connector: | 4 ports with 802.3at PoE+ injector function (Ports 1 to 4) |
| Network Cables | Twisted-pair: 10BASE-T: 2-pair UTP Cat. 3,4,5, up to 100m 100BASE-TX: 2-pair UTP Cat. 5, up to 100m 1000BASE-T: 4-pair STP Cat 5 up to 100m
Fiber-optic Cable 1000BASE-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to
220/550m/2km. 1000BASE-LX: 9/125μm single-mode cable, providing long distance of
2/10/20/40/80/120km (depending on SFP module) 100BASE-FX: 50/125μm or 62.5/125μm multi-mode fiber cable for up to 2km
(depending on SFP module) 9/125μm single-mode cable for 20/40/60/120km (vary on SFP module) |
| Interface |
| Connector: | 5 x RJ45 (4-Port 802.3at PoE Out) |
| Optical Port: | 2 x SFP 1000Base-X or 100Base-FX (auto detection) |
| PoE (Power over Ethernet) |
| Standard: | IEEE802.3af/at/bt |
| Port: | RJ45 |
| Power Pin Assignment: | Pair 1 End-span: 1/2(-), 3/6(+) Pair 2 Mid-span: 4/5(+), 7/8(-) 802.3bt/PoH: 1/2(-), 3/6(+), 4/5(+), 7/8(-) |
| PoE Budget: | Up to 360-watt PoE budget |
| Environmental |
| Operating Temperature: | -40°C to 80°C (-40°F to 176°F) |
| Storage Temperature: | -40°C to 85°C (-40°F to 185°F) |
| Relative Humidity: | 5% to 95% non-condensing |
| MTBF | > 200,000 hrs |
| Electrical and Mechanical |
| Input Power: | 48~57VDC (Terminal Block) |
| Power Consumption: | 382W Max. (PoE in use) |
| <5W (PoE not in use) |
| Power Input Overload: | Automatic Resettable |
| Reverse Polarity: | Present |
| Dimensions (LxWxH): | 95 x 88 x 46mm |
| Weight: | 300g |
| Casing: | Aluminum Case |
| Mounting Options: | DIN-Rail |
Support and Services:
Industrial PoE Switch Technical Support & Services
We offer technical support and services for our Industrial PoE
Switch product. Our support team is available 24/7 to help you with
any questions or issues you may have.
Technical Support
We provide technical support over the phone, email, and live chat.
Our team of engineers are available to answer your questions about
installation, troubleshooting, and configuration of the Industrial
PoE Switch.
Software & Firmware Updates
We offer software and firmware updates for the Industrial PoE
Switch. Our team of engineers can help you update the software or
firmware as needed.
Warranty & Maintenance
We provide a one-year warranty on the Industrial PoE Switch. We
also offer maintenance services to help you keep the switch running
optimally.
Packing and Shipping:
Package and Shipping for Industrial PoE Switch
The Industrial PoE Switch is shipped in a secure package to ensure
that it arrives in perfect condition. The package contains:
- Industrial PoE Switch
- Wall-mount Kit
- 4-pin terminal block
- User Manual
The switch is shipped in a cardboard box, padded with foam on the
sides for extra protection. The box is then placed in another
cardboard box with extra cushioning material to ensure that it
arrives safely.
The shipping carrier used will depend on the destination. All
orders are shipped within 48 hours of purchase.
Din Rail PoE Switch Ordering Information:
| Model | Description |
| LNK-IMC205GHP-SFP | Industrial 4-Port 10/100/1000T 802.3bt 90W PoE + 1-Port
10/100/1000T + 2-Port 100/1000X SFP Gigabit Ethernet Switch |
| SFP Options | ► SFP option. Please select your SFP on our SFP Options Page
(Industrial SFP). |
| ► SFP module is to be purchased separately. |
| Mounting Options | ► Default DIN-Rail Bracket installed; |
| Power Options | ► 480W/10A 48VDC DIN-Rail Power Supply. Open Wire for Terminal
Block. |
| ► Power Supply is to be purchased separately |
