Industrial 36W Gigabit PoE+ Injector Adapter 12VDC 48VDC Power
Input
PoE Injector Splitter 12VDC Output Voltage 2-Port Data Output PoE
Splitter
PoE Injector Splitter Advantages
► 12~48VDC Power Input
► 1 RJ45 Ethernet Data Input Port + 1 RJ45 Power Over Ethernet
Output Port (Data + Power)
► Support IEEE802.3at Power over Ethernet (PoE+) Power Sourcing
Equipment
► Support 10/100/1000Base-TX
► Support DIN-Rail & Wall-mount installation.
► Extensive LED indicators for PoE diagnostics
► Environmentally Hardened -40°C to 80°C (-40°F to 176°F) operating
temperature
Technical Indexes
| Ethernet |
| Standards: | IEEE802.3af Power over Ethernet |
| IEEE802.3at Power over Ethernet |
| Processing Type: | Forward |
| Half-duplex, Full-duplex |
| Forward Filter Rate: | 1,488,000pps (1000Mbps) |
| Cabling: | 10/100/1000Base-T: Cat5 or above |
| Maximum Distance: | Cat5 UTP up to 100m |
| Connector: | 2x RJ45 |
| Environmental |
| Operating Temperature: | -40°C to 80°C (-40°F to 176°F) |
| Storage Temperature: | -40°C to 85°C (-40°F to 185°F) |
| Relative Humidity: | 5% to 95% non-condensing |
| MTBF: | >200,000hrs |
| Electrical and Mechanical |
| Input Power: | 12~48VDC (Terminal Block) |
| Power Consumption: | 36W Max. |
| PoE (Power over Ethernet) |
| Standard: | IEEE802.3af/at |
| Port: | RJ45 |
| Power Pin Assignment | 4/5(+), 7/8(-) |
| Max. Power per Port: | 30W Max per port (Alternative B Mode) |
| LED Indicators: |
| Power: | Power Status |
| PoE: | PoE Status |
| Dimensions (WxDxH): | 95 x 70 x 30 mm |
| Weight: | 0.25Kg |
| Casing: | Aluminum Case |
| Mounting Options: | DIN-Rail / Wall-mount |
| Regulatory Approvals |
| ISO9001 |
| FCC part 15, Class A |
| EN55022:2006+A1: 2007 Class A |
| Surge Protection: |
| RJ45: 1KV |
| Power: 500V |
| ESD: 4KV/8KV |
Overview
The LNK-INJ301 product is a Hardened Gigabit High Power PoE
Injector allows you to connect the IEEE 802.3 af/at PoE device such
as camera and access point with a non PoE LAN switch within the
distance of 100m.
Both the Ethernet port (to switch) and the PoE Out port (to PoE
device) support 10/100/1000Base-T and are compliant with IEEE
802.3ab. The PoE Out port is also compliant with IEEE 802.3 at.
LNK-INJ301 provides an integrated power solution with a wide range
voltage of 12~48VDC for high availability applications.
Ordering Information
| Model | Description |
| LNK-INJ301 | 12~48VDC Power Input Industrial Gigabit PoE+ Injector |
| Mounting Options | ► Default DIN-Rail Bracket installed; Wall Mount Bracket is
included. |
| Power Options | ► Power Supply is to be purchased separately |
