1000M Mini Powerline Ethernet Adapter PLC Throughput Up To 800Mbps

1000M Mini Powerline Ethernet Adapter

Advantages

• MIMO Performance

• Support ITU-T G.hn baseband plans 25,50and 100MHz and MIMO techniques for powerline(based on G.9963)boosting PLC throughput up to 800Mbps PHY rate over powerline.

  · High Speed Data Transmission

  High speed (max.1Gbps)dramatically increases the performance of next-generation home entertainment applications such sa multiple high definition (HD) TV over IP( IPTV),3DTV and VoIP, digital video recorder(DVR) networking and media center PCs

• No Extra Wires Needed
• Simple Pairing, plug&play
• Quick and easy connections with embedded plug-and-play,no extra configuration required,WD-1000M can be paired easily simply connecting Ethernet cables to routers and devices.
• Extends Connecting Range & Eliminates Dead Spots
• Unlike wireless, power line technology is capable of actually covering more than 95% of a typical household area.
• More Outlets than Other Wired Solutions
• On average, there are 35 power outlets and only 3-5 cable or phone outlets in a household, therefore making power lines a more convenient solution for extending networks.
• Security
• With advanced data encryption capability, the power line networks are safer and more secure

• Local area network can be extended without the hassle of having to install extra wiring because the power line network is already a commonplace fixture in most households.

  
  

Interface	1* 10/100/1000Mbps self-adaption RJ-45 port.
LED display lights	Ethernet light (ETH) PLC communication status (ACT) Power light (PWR)
Ethernet	IEEE802.3 10/100/1000MbpsBaseT auto-sense Auto rate and duplex negotiation MDI/MDX support
Modulations	OFDM,FEC,Flexible frequency configuration
Data Rate	Up to 1Gbps
Management	HTTP Web-based;firmware upgrade via TFTP TR-069 Supported(Optional)
Security	AES 128 bits encryption ensures total data security
Networking Protocols	802.1D Ethernet Bridge 802.1Q VLAN Quality of Service(QoS) IGMP(IPV4)Snooping & MLD(IPv6)Snooping
Power	110-240VAC 50Hz/60Hz Auto power saving mode max 0.5W(in standby mode)
Environment Connection	Oerating temperature:0-40 degrees Celsius Relative humidity:8-95%(non-condensing)
Certifications	FCC,CE calssB, WEEE,RoHS, ITU-T G.hn Standard
Size	145*70*42(mm)
Environment	Operating Temperature: 0℃~40℃ Storage Temperature: -10℃~70℃ Operating Humidity: 10%~90% non-condensing Storage humidity: 5%~90% non-condensing

Overview

The E-LINK LNK-P1000 Series networking standard compliant Ethernet adapter, provides the best quality data transmission for the truly high-speed ‘connected home’ experience. It allows users to extend a local area network via existing power lines, eliminating the need for extra wiring. Installation at home (or in a small office) is quick and easy as the PowerGrid LNK-P1000 comes with plug-and-play technology.

The LNK-P1000 Series supports MIMO operation and can be used with two fully programmable reception and transmission paths to attain up to 1Gbps PHY rates.

Established in 2001 & headquartered in Shenzhen, E-link China Technology Co., Ltd. (E-link) is a leading Fiber Optic Communication and Video Transmission products manufacturer in China.

Our main products include Fiber Medai Converters, Industrial Ethernet PoE Switch, PoE Injector&Splitter, PoE Extender, Serial Converter.

HDMI Fiber Optic Converters, DVI Fiber Optic Converters, HD/3G/6G/12G SDI, CCTV Fiber Optic Converters, HDMI/ DVI/ VGA/ SDI UTP Extender etc.

With rich experience in providing high quality products in broadcasting, advertising and CCTV business, E-link has a large manufacturing factory in Shenzhen, able to deliver cost-effective solutions to serve our customers successfully.

Since the launch of our products on the domestic market and international market, we have won a good reputation for our high quality products and sincere services. Our products are widely applied to network systems of Telecom, Public Security, Bank etc. We also offer ODM&OEM service, and we have cooperated with some famous company all around the world. Our own brand "E-link" also well known in many countries and have distributors there.

E-Link Quality:

• ISO9001 Quality System

• Full-Spectrum environment and electrical testing of all product design

• 48 hours aging test before delivery

• Qualified CE, RoHS, FCC

Our knowledgeable sales, technical support and engineering staff are dedicated to understanding your requirements and designing products & solutions to meet your needs. We shall be pleased to provide you fiber optical network products with our best price, superior quality and fast delivery.